Typical Toilet Stall Dimensions
Figure 30 a standard stall.
Typical toilet stall dimensions. Read excerpt above code book. If done correctly the centers of your toilets decide where your panels go for your non handicap stalls. The size and arrangement of the standard toilet stall shall comply with figure here under standard stall. Standard toilet stalls are 36 wide by 60 depth.
The location of the door is in front of the clear space and diagonal to the water closet with a maximum stile width of 4 inches 100 mm. Partition stalls can have a minimum depth of 48 in most cases or up to 78 depth if needed. The minimum width of the stall is 60 inches 1525 mm. Privacy panels can separate the area but it is not required.
If the depth of a standard toilet stall is increased at least 3 in 75 mm then a floor mounted water closet may be used. The centerline of the water closet is 18 inches 455 mm from the side wall. The standard or average width of a non handicap stall is typically 36 wide with the smallest possible width being 30. It is necessary to position urinal stalls which are at least 60 inches 1 5 m high and standard 12 inches 30 5 cm from the floor.